Bak Revolver X2 is considered by many as a great tonneau cover. Its general performance as a tonneau cover is a little above average. It has an impressive eye-catching build that will add to the beauty of your truck even though this will be at a considerable cost.
Aside from being good-looking and its functionality, there are many other praise-worthy attributes mentioned by its users. Similar to other Bak products Bak Revolver X2 is not free of problems.
The primary focus of this discussion, therefore, is to point out these problems so that potential buyers will be aware of them and make the best decision when out for a new tonneau cover for their truck.
Common Bak Revolver X2 Problems & Possible Solutions
1. Poor engineering
There are reports of great concern from users who have noticed significant damage in their tonneau cover after driving the truck for a couple of days with the tonneau cover rolled up.
When such damage or similar damage which has no direct bearing with the user or anything that the user had done wrong is reported to the company, they demand the damaged cover first before sending a replacement.
Although their customer service may not be the worst type of customer demanding for the damaged one cover before agreeing to send a replacement could pose a great burden on the one who has to ship the cover for a significant charge.
Many have resulted to taking their tonneau cover to a local engineer who they feel will be able to solve what the company missed in the engineering of the tonneau cover that causes it to get damaged simply from being rolled up will the truck is driven for a given period.
Whenever the tonneau cover is rolled up, the part that is rolled up those not have enough support to sit on while you drive the truck around. Inadequate support of its weight will cause damage to the side rubber seals.
After a while, this will result in the seals being pushed off completely from the cover causing great leakage as water freely enters the truck bed damaging the bed and cargo.
The damage further takes away the looks of the tonneau cover and causes it to look older than its actual age. Given the cost of Bak Revolver X2, it is highly disappointing to find such an easily correctable error.
Hopefully, complaints from some of the users of the product will cause the company to look into this and correct this error.
2. Delamination problem
One of the commonest problems with Bak Revolver X2 is how susceptible the cover is to the sun. While it is erroneous to believe tonneau covers are built to withstand the harsh rays of the sun and do not need to be protected from it, one should be able to expect some degree of resistance to harsh environmental elements such as the suns rays.
Bak Revolver X2 is more prone to damage from exposure to the sun than the exterior of the truck. The vinyl is wrecked easily by the sun and left separated. In the worst-case scenario, this could end up affecting the functionality of the tonneau cover.
No truck owner using a tonneau cover for the truck expects the cover or any other car part to last forever, however, the degree of susceptibility of Bak Revolver X2 to the sun greatly reduces its life span, especially for users who live in a sunny environment with a few parking garages.
Such truck owners are forced to park their vehicles in the open while the sun continuously chews on the cars finish until it causes great damage to the tonneau cover.
Thankfully, users can order a new replacement from the company by pulling a claim on the fading warranty. However, a simpler way to prevent this from happening is by reducing the amount of exposure the truck has to the sun by parking it under a garage, a canopy, or a tree’s shade. You can also get a cover for the truck to help keep it protected from the sun.
Additionally, using sunscreen solutions such as 303 marine protectants could prove helpful and extend the lifespan of your tonneau cover.
Those who have their trucks parked in the garage will hardly notice such separation in their vinyl compared to those living in places such as Florida or Miami where the sun shines with aggression.
To avoid missing your warranty window, upon noticing any signs of delamination, ensure you promptly contact the company’s customer service with your complaint. If you are still okay with other BAK products, then request a different type of BAK tonneau cover if you will.
3. Problem with the cold
Reports are suggesting Bak Revolver X2 is particularly more susceptible to cold than other types of tonneau cover.
This may imply the cover not being ideal for winter months or people living in really cold parts of the world. Whenever the weather gets cold, some users have reported great difficulty with rolling up the tonneau cover. The cover becomes less flexible and proves difficult to roll up.
Given that the aim of the tonneau cover in the first place is to protect the tonneau bed and cargo from snow, rain, and other harsh environmental conditions, not rolling up when needed the most is a slap on the face and defeats the very aim of the cover.
In some instances, however, this is a result of the snow or the ice covering up the tonneau cover and not related to the type of construction material used in the cover as insinuated by some of the users. Therefore, once the snow or ice is removed, this should get the problem sorted.
Sometimes, the tonneau cover getting stuck and refusing to open has nothing to do with ice or snow but a problem with the vinyl, in such cases, the etiology of the problem can be reached to a manufacturing defect.
The user may not find other ways of solving such a problem aside from sending it back to the manufacturers for a replacement if the cover is still within the warranty window.
Generally, some level of caution is required when using BAK tonneau covers including the Bak Revolver X2 in the cold.
The greatest challenge will be moisture getting under the seals and freezing afterward. While this will make it more difficult to open the cover, when forcefully opened, the seals are likely to be torn apart.
Each time it snows on the cover, ensure to clear off the snow completely before attempting to open the cover as this could cause some significant damage to the cover.
To avoid this type of problem with your tonneau cover, some do not open their tonneau cover at all during the winter months with great snowfall.
Those living in places where the temperatures are either too hot or too cold want to have a second thought on buying Bak Revolver X2 for their truck.
This cover has been reported by some users as being vulnerable to extremes of temperature. In the cold, the vinyl starts shrinking and getting cracked up.
While in hot weather, the vinyl delaminates as its glue holding it to the aluminum slate deteriorates under the effect of the heat.
These changes have been noted by some users after a couple of years of using their cover and seeing how the entire cover began to fall apart.
Trending Searches
- 5 Hidden Truxedo Pro X15 Problems & Solutions
- 5 Common Bakflip F1 Problems & Possibe Solutions
- 5 Common Bakflip MX4 Problems And Solutions
- 4 Hidden Retrax Bed Cover Problems & Possible Fix
4. Fitness problem
Fitness and installation problems are common complaints heard from many users of tonneau covers. Many brands are yet to figure this flaw out.
On some occasions, however, this has nothing to do with the make of the cover but from ordering the wrong size or inappropriate style of tonneau cover for your truck.
With Bak Revolver X2, the commonest complaint is in terms of the clamps which are designed with teeth, yet there are no corresponding teeth in the truck bed for such.
Without corresponding teeth for those to grip on to, it seems like a flawed design to have teeth on the clamp. Clamps with flat surfaces will do better than the current design marketed by the company.
Aside from this, Bak Revolver X2 fits well generally and prevents the entry of water into the truck bed when the truck is driven under the brain or during a car wash.
Those who complain about the teeth in the clamp do this out of concern for the marks that may be left on the truck bed whenever the cover is removed.
Yes are a good number of complaints about Bak Revolver X2, its qualities such as the impeccable security system, general outlook, and ease of installation cannot be denied. The cover will improve the looks of your truck, protect your bed and cargo, improve fuel economy amongst other benefits.
Conclusion
It helps to learn about the pros and cons of the tonneau cover you wish to purchase for your truck, sure no tonneau cover lasts forever, there are those with a longer lifespan and fewer drawbacks, we aim to help you make such a decision.