Disclosure: This page contains affiliate links, As an Amazon Associate, I earn from qualifying purchases (at no extra cost to you). Learn More
If you are concerned about decreasing noise and possible flapping from the wind when travelling with your truck cover on, then you should make sure they are well secured to the truck. Before tightening the clamps down, you need to be sure everything has been correctly positioned and in the right order.
(This Original Gust Guard might act as an extra guard and can help prevent your covers from blowing away or even lifting during windy days).
How tight should a tonneau cover be is a function of how well secured they are. Your bed cover needs to be tight with little to no sagging between bows. When they fit snugly, You should be able to hear a drum sound when you flick it with your fingers.
Your truck cover should also glide easily during closing/opening. They shouldn’t be too tight either that they begin to strip and cause the clamps to be ineffective.
Travelling with heavy and large cargo on the bed truck can be a really challenging enterprise indeed, especially where the load is not tied securely to it.
There is the possibility of the load swaying from side to side, and also bumping up and down whenever you navigate with it across uneven terrain and sharp bends.
This unavoidable movement can result in damage to your cargo, as well as the truck cover or its clips and hinges. How then should we secure goods at the back of trucks for conveyance without any risks to either the truck or its cover? We would look at the different ways this can be done.
Just like had been done previously, you have repeatedly been advised to place your load rearwards and in a central position at the back of your truck and pad its top, with which it is likely to keep hitting the under the surface of the bed cover.
Also, you are told to always ensure that you bungee the goods down firmly but not too tightly so as to prevent it from both hitting the underside of the lid or its hinges, which can easily get damaged this way.
How best you fix any truck cover is both strenuous and time-consuming. If you happen to have a soft truck cover, make sure to under-roll it rather than over-rolling it. This is basically because under rolled tonneau covers rarely open up on transit as compared to over rolled ones.
Essentially, therefore, the best way to hold your truck cover whenever you have goods to transport is to use binder clips to hold the covers to the body of the truck by its hinges firmly, but not too tightly. Supplied straps can also be utilized to serve the same purpose effectively as well.
Read Also: Will A Dodge Tonneau Cover Fit A Ford?
Should Tonneau Cover Be Tight Or Loose In The First Place?
As a rule, never tie your truck covers either too tightly or loosely, as doing this will safeguard the goods, the truck cover as well as its bed too. When the tonneau cover is held too tightly, it may overstretch its material such that with time, it will begin to open up at the seams or where its fabric are aligned together.
Similarly, when it is put in place too loosely, the cargo is bound to rock from side to side with possible damage to itself, the truck bed and also the truck cover too. In a nutshell, all tonneau covers should be put in place firmly but not too tightly as a provision against all possible contingencies while in transit.
Do Loosen Tonneau Covers Affect The Speed Of A Truck In any way?
Yes, when the tonneau cover is opened, it is likely for it to be so positioned as to oppose the direction of the prevailing wind. (Read Also: Can I Drive With My Tonneau Cover Up?)
When this happens, the truck is more or less forced to move rather slower than it otherwise should, or if you force it with the gas pedal to move as fast, there will be a surge in your gas mileage.
This is essentially the reason why trucks moving with open covers tend to consume more gas than those whose tonneau covers are securely closed.
How Do You Keep A Tonneau Cover From Flapping?
It is very easy indeed to keep a tonneau cover from flapping in the wind while in motion on the road through several and simple measures.
Immediately after placing your cargo on the bed of the truck the way it should be, make sure to use all the available straps to hold both the goods and the truck cover (This Original Gust Guard might act as an extra guard) firmly and relatively immobile from surrounding wind.
To further make certain that any flapping movement is prevented, fix the tonneau straps firmly to the braces provided for this purpose on the sidings of the truck. This will certainly prevent any flapping movement or rustle in the wind, no matter how strong it may be.
Do Soft Tonneau Covers Make Noise?
Yes, soft tonneau covers make noise much more than their hard counterparts, especially when their straps are not tied firmly to their braces if they come in contact with the surrounding wind while in transit.
Read Also: Do Tonneau Covers Stretch?
The best way to prevent this is by tying them securely and using their clips to keep them attached to the sides of the truck. Hard tonneau, on the other hand, makes less noise but are more prone to damage if they are exposed to the same circumstances.
It is for this reason that we are advised to exercise great care in making the best choices before any purchase is made. Consequently, you are therefore advised to conduct enough and wide research before you do anything in the matter.
How Do You Tighten A Tonneau Cover?
Before you tighten up any truck bed cover, you must first make sure that your cargo is well placed in the truck according to the manufacturers’ instructions.
This you can easily do by tying up all the provided straps firmly to their braces on the sides of the truck, after making sure that the cargo is not in contact with the inner surface of the truck cover.
The truck cover straps are so designed that you can pull them to ensure that they have a strong grip, which will keep them tight. In some instances, you can augment this by applying additional straps, just to make sure that they remain firmly in place throughout the journey.
Do Tonneau Covers Shrink?
Yes, they do. This is mainly because they are made of materials that are liable to become shorter, such as polyvinyl chloride especially when they come in contact with certain chemicals during washing. (Read Also: Can You Take A Truck With A Tonneau Cover Through A Car Wash?)
Furthermore, tonneau covers are also affected by any continuous exposure to harsh sun rays, which will eventually make their fabric become more hardened and shorter.
To avoid this from happening, you are required to wash them with only those substances approved by the manufacturers and also park your truck under a shaded tree or in a closed garage during washing or storage. If you strictly follow these steps diligently, you are less likely going to get them shrunken.
How Long Do Tonneau Covers Last?
How long tonneau covers last is dependent on several factors, although some last longer than others due to their superior qualities. Careful and in-depth research before buying will guide you on how to go about the whole thing.
All in all, truck covers can last for several years, if they are properly maintained. Careful maintenance involves washing them properly without applying harmful chemicals and waxes.
Read Also: Will A Chevy Tonneau Cover Fit A Gmc?
Hand washing is by far more preferable to an automatic wash, but where you cannot afford to get them washed by hand, you should be very careful in selecting how they are washed.
Store them well by parking your truck always under the shade of a tree or in a covered garage. With all these measures taken without any let-up, you are most certainly going to get your truck covers around for as long as possible; sometimes up to for as long as five or more years.
What Are The Different Types Of Tonneau Covers?
Truck covers are mostly available in several styles and made from different materials each with its particular characteristics. This makes it difficult to effect a quick selection in some instances because there are too many types to choose from.
However, the most common types for daily uses are the canvas tonneau covers, the one-piece fibreglass hard bed covers, roll-ups and the flip-up truck bed covers.
The one-piece fibreglass type does not only look good but are also very durable too. However, these types of truck covers limit the size and shape of the cargo you carry.
To start with, these kinds of truck covers have to be removed completely whenever you wish to transport large cargo, but they have the advantage of being provided with locks that close securely and thus ensuring that you can store your items safely in the truck.
The canvas truck bed covers are quite easy to both store and remove from the truck, but they cannot be locked, and this means that your items are not very secured. The fold up and roll up types of tonneau covers also have locks by which you can lock them up and secure your cargo from any harm. Snap tonneau covers have Velcro straps that are used to tie them to the back of your truck.
They are, however, not as popular as other tonneau covers because they give you a lot of stress. For instance, whenever you wish to open them, you must first undo the buttons before gathering them in one place, after which you can then secure them to the back of your truck using Velcro straps.
How Secure Are Tonneau Covers?
The hard one-piece tonneau covers are inarguably the most secure of them all. This is because they are manufactured from very sturdy and reliable materials such as fibreglass, aluminium and polypropylene and they equally have a lock.
In addition, they have the ability to overlap your bed rails and tailgate too. The hardcovers also guarantee that none whosoever can take a peek at what cargo you are carrying or otherwise. (Read Also: How Do You Open A Tonneau Cover When Tailgate Won’t Open? )
This quality has the added advantage of providing more security especially since people can only steal what they see. It makes it exceptionally difficult to ascertain whether the truck bed is empty or not. Tonneau covers are an expensive investment that must not be treated lightly and for this reason, you should conduct in-depth and adequate research before any purchase of the item.
How Tight Should A Tonneau Cover Be – Conclusion
Tonneau covers are desirable for different reasons ranging from security of the transported cargo, their protection against thieves or dust, as well as from the harsh elements of weather too.
Proper use and maintenance of truck bed cover come with a lot of demands in how you handle them, how you install and unmount them, how you clean them and virtually how you go about everything. Should you make the mistake of buying the wrong type, you stand the risk of getting them damaged prematurely.
It is for this same reason that you are seriously advised to conduct in-depth research before you venture into it. There are various companies that produce these items, with each product having peculiar and distinctive characteristics.
From this multitude of competing products, you can make a reasonably satisfying choice particularly if you take your time to find out about them through either their websites or customer care services.
There is the likelihood of an increase in the mileage of your truck with especially poor use and installation of these products, which makes it doubly important to diligently study any accompanying user manual as a guide to what should or shouldn’t be done.
Generally speaking, the manufacturers of these truck covers assure customers that their products are resistant to most things such as certain chemicals and can also bear significant weight without the risk of any damage. Regardless of these bogus claims, you are advised to strictly comply with measures that will safeguard your valuables through careful uses and proper maintenance.
You will find it easy to agree with this approach considering the fact that this equipment do not come cheap. Washing is where most people get their truck covers damaged unduly.
This happens where they may be tempted to stand on them while cleaning. Eve for such situations, you have been guided on what to do without any risks. Whatever the manufacturers may claim, do not stand on your truck covers in order to wash them, no matter how strong they may be.
Preferably, use a foot stepladder to reach all its parts during washing, or better still, remove it from the truck for washing and replace it thereafter. Finally, it will be worthwhile to reach out to some of those branded manufacturers and suppliers of these items that we have given in this article, to avoid any hard-luck stories. Thank you.