5 Hidden Bestop Trektop NX Glide Problems & Solutions

How Do You Fix A Ripped Tonneau Cov...
How Do You Fix A Ripped Tonneau Cover?

Disclosure: This page contains affiliate links, As an Amazon Associate, I earn from qualifying purchases (at no extra cost to you). Learn More

The jeep comes with either a hardtop or a soft top. Any of the tops has its comparative advantage over the other. One of the favorite choices of many people when it comes to buying a soft top for their jeep is Bestop Trektop NX Glide. This is because the top is durable and weather resistant.

Despite its numerous pros, the top also has its reported problems. Learning about these problems would guide your choice when you want to buy a jeep cover and how you can care for the cover. Keep reading for more information.

Bestop Trektop NX Glide Problems

There are many soft top products in the market but getting a durable one is a hassle. That is why many jeep owners make research or ask for recommendations before they buy any.

One of the topmost choices of many people is Bestop Trektop NX Glide but that doesn’t mean the product is free of criticism. The following are some of the likely problems of installing the Bestop Trektop NX Glide soft top on your jeep.

1. Difficulty in installation

No manufacturer will tell you that you will likely experience problems with the installation of their product. The truth is that you will likely experience difficulties when you want to install Bestop Trektop NX Glide, especially when you want to do it for the first time.

This is because of the unclear instructions in the manual and misaligned drilled holes on the cover. Contacting customer care will not even give you the desired solution instantly. You will be required to watch many videos. The following are some of the things you can do to avoid the problem.

Hire a professional

You can spend many hours trying to install Bestop Trektop NX Glide without any positive results. You are even subjecting the top to quick ruin if you do a poor job with the installation.

To avoid time wastage and potential harm to the product, it is recommended that you seek the service of a professional installer. With a few bucks, the job would be done quickly.

Contact the manufacturer

You could experience problems with the installation at times when the holes on the product failed to align with the drilled holes on your jeep.

If you forcefully install such a type of soft top, it will not align properly and it could lead to other problems. It is recommended that you contact Bestop for possible replacement of the cover.

2. Loose fittings

The Bestop Trektop NX Glide is expected to stay firmly on your jeep. This would make the top look attractive and durable. After installation, the tip will likely feel loose on the jeep.

This is due to several bends, wear, and loose screws. If you do not fix the problem as soon as this occurs, the soft top would soon go out of shape. Highlighted below are some of the things you can do to fix the problem.

Retighten the bolt

Once the top is loose fitting, you should take your time to inspect all the screws and bolts that hold the cover to the vehicle. If any of them is loosened, you can then retighten it to the level recommended by the manufacturer. If possible, you should adjust the top back to shape before you tighten the bolt.

Go to a professional

In a situation where you are unable to fix the problem yourself, it is time for you to visit a professional. The problem would be corrected with a few bucks.

Trending Searches

3. Zipper problem

You will need the zip of the top to be in good condition for you to enjoy the soft top. However, you likely experience problems with the zipper of Bestop Trektop NX Glide, especially on the rear window.

This problem is usually caused by a worn zipper, unsynchronised teeth, and forceful yanking. This could serve as a leaking spot for water when it rains. Here is a list of some of the things you can do to fix the problem.

Contact Bestop

If you still have a valid warranty for the top, you can contact the manufacturer for possible replacement of the zip and other assistance. In most cases, you will likely wait for a few days before you get the replacement, provided it is approved.

Use a candle

For a smooth running of the zipper, you can rub the side of a candle against it when it becomes stuck. This will allow for free movement of the zipper.

Seek help

You might not be able to resolve the problem with the steps highlighted above. In such a situation, you should seek help from professionals. You will be guided on the likely solution to the problem. At times, the professional might recommend that you change the zipper.

4. The gap between the window and tailgate

Recall that it has been said earlier in this article that the soft top must tightly align to the jeep. Many users of Bestop Trektop NX Glide have, however, complained that there is a gap between the back window and the tailgate.

In most situations, this problem is caused by poor installation, wear on the soft top, or misaligned soft top. Well, such an opening is a problem when it rains and when it doesn’t. That is why you have to fix the problem as soon as possible. Below are some of the things you can do to resolve this problem.

Go to a professional

In a situation where you have installed the soft top yourself and you are experiencing this problem, you should seek a solution from a professional installer. The problem could be a result of misaligned holes. This would be done with ease.

Tighten the loose ends

You can inspect all screws and bolts that aligned the soft top to the jeep for possible loose ends. If there is any, you should tighten it immediately. Apart from this, make sure the cover you are using is the perfect size for your jeep. You should check the manual for more information.

Contact the manufacturer

If you still have a valid warranty, you can contact the manufacturer for a possible explanation of the problem and ask for a replacement. Who knows? You might get a new soft top.

5. Flapping

Hearing unwanted noise is disturbing, especially when you are traveling interstate alone. From users complaining online, it was stated that the Bestop Trektop NX Glide flaps at the rear window when the jeep is in motion.

This is because the window is not tightly secured to the jeep or there is a passage where air penetrates the product. The following are some of the things you can do to resolve the problem.

Check for the possible opening

Whenever the rear window flaps, you should inspect the soft top for a possible opening. If there is any, you should seal such an opening immediately.

Tighten the cover

You should also take your time to inspect the cover for any possible loose screw or bolt. You then retighten such a bolt to the recommended level.

Care for Bestop Trektop NX Glide

Though durable, dirt, dust, mud, and many other contaminants are enemies of Bestop Trektop NX Glide soft top. This means that you must always care for the cover. Highlighted below are some of the ways you can care for Bestop Trektop NX Glide.

Park in a shady area

Long exposure of Bestop Trektop NX Glide to sunlight is potential harm to it. Not only could it ruin the color, but it could also reduce its lifespan. It is recommended that you construct a garage for the jeep, if possible. If not, you should park the jeep in a shady area. Avoid parking the jeep under the tree because bird droppings could also harm the top.

Wash regularly

Leaving mud, dirt, dust, and other forms of debris on the soft top for a longer duration will reduce the lifespan of the top. Hence, you should regularly wash the cover.

However, make sure you avoid using alcohol-based or acid-based cleaners. You can make use of cleaners recommended by the manufacturer or auto-rated soap.

Switch during winter

Due to its nature, the Bestop Trektop NX Glide might not be able to withstand the harshness of winter. If possible, you should switch to a hardtop during cold months. You can then reinstall your Bestop Trektop NX Glide at the end of the season.

Avoid high-pressure washers

Many car owners believe that high-pressure washers make it easy to clean the car. Though this might be relatively true, you should not make use of it to wash the soft top. The material of the top would get ruined quickly when you do this.

Invest in quality

You cannot compare the durability of a quality product with its inferior counterpart. You are saving yourself from a lot of hassles when you invest in quality soft tops. You can contact Bestop directly when you want to buy any of their products.

Conclusion

Bestop Trektop NX Glide has its pros and cons. The benefits outweigh the drawbacks. With proper maintenance, you can avoid some of the problems highlighted in this article.

Leave a Comment