Disclosure: This page contains affiliate links, As an Amazon Associate, I earn from qualifying purchases (at no extra cost to you). Learn More
One of the best ways to get a durable product in the market is to read about the experience of previous users about the product. You can also read the pros and cons. From your research, you will be able to juxtapose and select the best product.
Do you know about the problems of Bestop Sunrider for hardtop? If not, check out this article for its common problems and possible quick fix.
Bestop Sunrider For Hardtop Problems
Like other products, the Bestop Sunrider for hardtop is advertised as a durable product. This is relative truth but you must learn from the experience of others. This article will compile some of the top problems of Bestop Sunrider for the hardtop, how you can fix it, and other useful information.
1. Water leakage
Your upholstery and other items in the car are very important. You will not want water to damage them. However, available online reviews suggest that there is a high chance that Bestop Sunrider for hardtop leaks water into the car, especially during the rainy season.
This occurs when you want to open the door. You will just notice that water starts dripping into the car the very minute you open the door.
This problem is usually caused by poor installation, worn parts, and clogged drain channels. The following are some of the ways you can resolve the problem.
Check for a possible clog
The drain channel is there so there won’t be water residual on Bestop Sunrider for the hardtop. In a situation where you are experiencing water leakage, you should check the channel for possible blockage. The blockage could be due to accumulated dirt in the drain channel. You should clear the blockage immediately.
Apart from blockage, poor work during installation could also make the Bestop Sunrider for hardtop leak water into the car.
At times, the Bestop Sunrider for hardtop will not align properly with the car. In a situation like this, you have to seek help from a professional installer.
Call for help
There are instances where the problem could be from the product. If you have tried the solution highlighted in this article and you are unable to resolve the problem, you should contact Bestop. You will be asked to produce pictures of the problem and probably get a replacement.
2. Split in the windshield seal
You know the importance of the windshield in the vehicle. One of the problems you will face when you install Bestop Sunrider for a hardtop is that there might be a break in the windshield seal.
This is caused by the contrasting material of the product or wear. If not fixed quickly, this could lead to a bigger danger. Highlighted below is what you can do to fix the problem.
Go to a professional
Due to the sensitive nature of the windshield, it is recommended that you go to a professional when you notice the problem.
The seal would be corrected and your windshield would be secured. Also, you should seek help from a professional whenever you want to install the product. You should consider this if you do not have previous experience in installing soft tops.
3. Problem with the fabric
Most car owners that use Bestop Sunrider for hardtops stated that the fabric material of the product is always a problem. For instance, the material would stretch during installation, especially when the temperature is above 76⁰.
This problem implies that you might install the product wrongly and you will think that you have done the best job. What happens when the temperature is cold? Well, you can resolve the problem with the following step.
Use a professional installer
The flexible nature of the fabric of Bestop Sunrider for hardtop makes it a delicate task when you want to install the product on your vehicle.
With the aid of the manual and several video tutorials, you can install the product yourself. What if there is an error in the process? It is recommended that you seek the service of a professional installer.
Contact the manufacturer
Once you notice that the fabric stretches out, it will be better if you halt the installation process. You should contact Bestop for recommendations on what you can do. Some customers stated that they got a replacement for the product.
4. Wind noise
Many users believe that proper installation is all that is needed for a hassle-free Bestop Sunrider. This might be your experience but many users have stated that they hear the product make noise when the car is in motion.
Several factors such as wear, holes, and misaligned Bestop Sunrider are responsible for this. You might not be able to withstand the noise when the car is in high motion. Below are some of the things you can do to resolve the problem.
Block all openings
You can park the vehicle to inspect the possibility of any opening where the air is penetrating the product. If there is any, you should fix it immediately. You can get a weather seal or use any seal that is recommended by the manufacturer.
Tighten loose bolts
There are instances where the noise could be due to improper fitting of the product. If there is any loose part such as a bolt or screw, you should tighten such a spot immediately. However, make sure you do not exceed the recommended torque level by the manufacturer.
5. Quick discoloration
Though the product is acclaimed to be weather resistant, it could get discolored quicker when exposed to UV for a longer duration. Apart from this, the cleaning product could also make the product get discolored quicker. The following are some of the ways you can prevent quick discoloration.
Wash with auto-rated soap
If you go through the manual, you will see the recommended cleaning product. You should also restrict yourself to the use of only auto-rated soap.
Use a garage
If possible, you can construct a garage for your vehicle. This will reduce the duration of exposure to sunlight. Alternatively, you can park your vehicle where there is a shade. However, avoid parking under a tree to prevent droppings.
Maintenance tips for Bestop Sunrider for the hardtop
Just like other parts of the vehicle, you must care for the Bestop Sunrider for hardtop also if you want to use it beyond 3 years. The following are some of the things you can do to achieve this.
Avoid harsh cleaners
Some cleaning products in the market will ruin the material of your Bestop Sunrider. When you use such cleaners, the material would get ruined easily. For instance, you should avoid the use of alcoholic and acid-based cleaning products.
Exposure to UV for many hours often would ruin the color and the material of the Bestop Sunrider for hardtop easily. You should always park your car in a shady area.
Leaving a residual of dirt on Bestop Sunrider for hardtop would make the product get ruined easily. You should also clean the top anytime you clean the car. More detail on how to clean will be highlighted later.
If possible, you should switch to a hardtop during cold months. This will ensure that the material is still in good condition. However, if you must use Bestop Sunrider for hardtop during winter, you should not allow too much snow to settle on it.
Wash with hand
There are instances where you want a quick wash of the car. In such a situation, you would want to use a high-pressure washer. It is recommended that you avoid using a high-pressure washer with your Bestop Sunrider for the hardtop.
How to clean Bestop Sunrider for the hardtop
Cleaning the Bestop Sunrider for hardtop is very easy but you must follow the right step to avoid ruining the product. It has been stated earlier that you should not use a high-pressure washer and harsh cleaners. Highlighted below are some of the steps of washing Bestop Sunrider without the risk of ruining it.
Before you start at all, you should first rinse your Bestop Sunrider for the hardtop. This would make it easier for you to see the stubborn stain residual that is on the product.
Apply cleaning product
You can lightly apply the cleaning product when you are through with the first step. Recall that you should not make use of acid-based or alcohol-based cleaners.
Afterward you should get a soft bristle brush and gently apply it on Bestop Sunrider for the hardtop. You should do this in a circular motion until you have covered everywhere. You should pay more attention to any dirt residual.
After brushing and you are satisfied with what you have done, you can then use neat water to rinse the place again. You should then use a neat microfiber cloth to clean Bestop Sunrider for the hardtop immediately after you finish rinsing it.
Knowing the problem of Bestop Sunrider for hardtop would guide your choice. This, however, doesn’t mean that the product is not durable. With care, you can use the product for many years.